Delta LED Power Supply DPS-500AB-57-A Specification


1 Electrical Requirements
ITEM	CONDITION	SPECIFICATION
1.1 Input Characteristics:
1.1.1 Input Rated Voltage:		100Vac~134.9V@80% of full load
1.1.1 Input Rated Voltage:		135Vac~ 240Vac@full load
1.1.2 Input AC Voltage Range:	90Vac~264Vac	Operate normal, function OK
1.1.2 Input AC Voltage Range:	300Vac@5s	The power supply shall withstand without damage
1.1.3 Input DC Voltage Range:	127Vdc~370Vdc	Operate normal, function OK
1.1.4 Input Rated Frequency:		50Hz~60Hz
1.1.5 Input Frequency Range:		47Hz~63 Hz
1.1.6 Input Current:	100Vac@80% of full load	5A(rms) Max.
1.1.6 Input Current:	240Vac@full load	2.6A(rms) Max.
1.1.7 Inrush Current:	Cold start,	≤30A
	115Vac@80% of full load 230Vac@ full load	≤60A
	@25℃
1.1.8 Efficiency:	230Vac/50Hz @ full load	³94%
1.1.9 Power Factory:	230Vac/50Hz @ full load	³0.95
1.1.9 Power Factory:	115Vac/60Hz @ 80% of full load Power factor correction is active type	³0.98
1.1.10 Harmonic Standard:	100Vac/60HZ@ 40%full load /80% of full load	JIS C 61000-3-2 class D EN 61000-3-2 class D
1.1.10 Harmonic Standard:	230Vac/50HZ@ 50%full load / full load	JIS C 61000-3-2 class D EN 61000-3-2 class D
1.1.11 Power Saving:	115Vac/60Hz	<6W
	230Vac/50Hz
	Under no load condition
1.1.12 AC Brown In/Out recovery:	@ 80% of full load	No damage
1.1.13 Line Voltage Sag & Surge:	Sag:	The output voltage shall remain 95% of output regulation spec.
	115Vac-80Vac-115Vac(5000ms-500ms-5000ms)
	230Vac-161Vac-230Vac(5000ms-500ms-5000ms);
	Loading: 80% of max. load Surge:
	132Vac-155Vac-132Vac(5000ms-500ms-5000ms);
	264Vac-293Vac-264Vac(5000ms-500ms-5000ms);
	Loading: 80% of max. load
1.1.14 AC Cycle Drop Out:	AC line voltage:	The output voltage shall remain 95% of output regulation spec.
	115Vac-0-115Vac(1000ms-10ms-1000ms);
	230Vac-0-230Vac(1000ms-10ms-1000ms);
	Output load: 80% of max. load
1.2 Output Characteristics:
1.2.1 Output Rated Voltage:	Measured at the end of DC terminals	+24V
1.2.2 Output Current:	90Vac~134.9Vac&127Vdc~179.9Vdc	0A to 16.72A(80% load)
1.2.2 Output Current:	135Vac~264Vac&180Vdc~370Vdc	0A to 20.9A(full load)
1.2.3 Output Voltage Regulation:	Input Voltage:90Vac~264Vac	+22.8V to +25.2V (5%)
1.2.4 Output power	Maximum continue	501.6W
1.2.5 Line Regulation:	Percentage difference between 135Vac@full load and 264Vac@full load	£ ±0.3%
1.2.6 Output Voltage Ripple and Noise:	Under any output load condition 0.1uF Ceramic Cap. and 47uF/50V Electrolysis Cap. Paralleled between the ends of output terminals. Bandwidth:20MHz	£240mVp-p @25℃
1.2.7 Turn-On Delay Time:	The output rise to 90% of the rated voltage @25℃ 230Vac full load/115Vac 80% of full load @-25℃ 230Vac full load/115Vac 80%	£ 1000ms
1.2.8 Hold Up Time:	The output falls to 90% of the rated voltage.input should be removed at phase 0°. 230Vac/115Vac with 80% of full load	³ 10ms
1.2.9 Rise Time:	The output rise from 10% to 90% of the rated voltage at 115Vac/80% of full load and 230Vac/ full load	£ 50mS
1.2.10 Output Overshoot/Undershoot Voltage:	Under any output load condition	£ 10% of rated output voltage
1.2.11 Load Transient Responses:	1.Max. step load:
	25% to 50% of full load and 50% to 75% of full load Frequency:50Hz~10kHz	Voltage tolerance limit 5% of Vo
	Duty cycle:50% S/R=1A/us
	Cap. Load:1000uF
	2.Max. step load:
	25% to 75% of full load Frequency:50Hz~10kHz Duty cycle:50% S/R=1A/us	Voltage tolerance limit 5% of Vo
	Cap. Load:1000uF	Voltage tolerance limit 5% of Vo
	3.Max. step load:0A to Max. load Frequency:50Hz~10kHz	No damage
	Duty cycle:50% S/R=1A/us
	Cap. Load:1000uF
1.2.12 Power De-rating:		Refer to figure 1 and figure 2
1.2.13 No load Operation:	Input voltage: 90Vac ~ 264Vac, Output Load :0A	There is no specification of
1.2.13 No load Operation:	Input voltage: 90Vac ~ 264Vac, Output Load :0A	voltage range, and PSU shall operate normally.
1.2.14 Maximum Capacitive Loading:	6000uF @25℃	Can start-up
1.2.15 Loop Gain	115Vac 60Hz/Load:0.2A/80% of full load 230Vac 50Hz/Load:0.2A/full load	1. Phase margin > 45deg
1.2.15 Loop Gain		2. Gain margin < -10dB 100% Derating
1.2.16	RL1 Thermal
1.3 Protection
1.3.1 Short Circuit Protection:	The power supply can withstand continuous short at DC output and will shut down and then auto recovery while remove fault condition.	No broken, No smoke Auto recovery
1.3.2 Over-Voltage Protection:	The PSU will shut down that means no output while over voltage occurs at output terminals that caused by internal fault.	26.4V~31.2V
1.3.3 Over Current Protection:	The power supply shall shut down automatically when over-current occurs at output terminal at 25’C.	26A~ 38A Auto recovery
1.3.4 Over Temperature Protection:	The output shall be protected at over-temperature condition.	No broken, No smoke Auto recovery OTP>70℃（the ambient temperature）@115V /13.38A load & @230V/16.72A load
2 Environmental Characteristics:
ITEM	CONDITION	SPECIFICATION
2.1 Humidity:	Operating Humidity:	20% ~ 95%RH
2.1 Humidity:	Shipping/Storage Humidity:	10% ~ 95%RH
2.2 Altitude:		Operating：0 to 5000M /Storage：0 to 5000M
2.3 Cooling:	Ventilation cooling
2.4 Immunity:
2.4.1 Electric Fast Transients(EFT):	Refer to IEC61000- 4-4	No function error
2.4.1 Electric Fast Transients(EFT):	Line to Line: +/- 2KV	No damage
2.4.2 Lightning Surge Immunity(Surge):	Refer to IEC 61000-4-5 Line to Line: +/- 1KV Line to Earth: +/- 2KV
	Refer to IEC 61000-4-5	No function error No damage
	Line to Line: +/- 2KV Line to Earth: +/- 4KV	No damage
2.4.3 Electron Static Discharge(ESD):	Refer to IEC61000-4-2	No function error. No damage
	Air Discharge: ± 15KV min.
	Contact Discharge: ±8KV min.
2.5 Electromagnetic Interference (EMI):		Class A,10db
2.6 Safety:
2.6.1 Safety Standards:	UL60950-1/IEC60950-1/EN60950-1
2.6.1 Safety Standards:	GB4943.1-2011/ IEC62368-1
2.6.2 Safety Certificate:		CB/UL/TUV/CCC/CE/BSMI/ KC/FCC
2.7 Leakage Current:	240Vac / 50Hz	£ 1mA
2.8 Earth Grounding:	Apply 30A current, test time: 60s (3s for production line)	<0.1 ohm
ITEM	CONDITION	SPECIFICATION
2.9 Insulation Resistance:	Apply DC 500V between AC input and secondary,AC input and FG,secondary and FG	>100MΩ
2.10 Dielectric Strength: (Hi-Pot):	1. Between AC input and secondary apply AC 3KV, test time 1 minute.	Cut off current < 10mA.
	2. Between AC input and earth ground apply AC 1.5KV, test time 1 minute.	Cut off current < 10mA. Cut off current < 10mA.
	3. Between secondary and earth ground apply DC 500V, test time 1 minute.
	For production line, test time of all above items will be 3 second.
2.11 Temperature:	Operating	-25 to 70°C（refer to 1.2.11 power de-rating curve，add not less than 700mm 700mm5mm aluminum plate auxiliary cooling）(the PSU shall turn on at -40°C full load)
2.11 Temperature:	Storage	-40 to +85°C
2.12 MTBF:	115Vac/60Hz load/16.72A @25℃ 230Vac/50Hz load/20.9A @25℃	168,000hrs
2.13 CAP. Life:	AC/115V, load/16.72A@40℃	>3 years
2.14 Burn-In:	AC/115V, load/10.45A, 40℃	4hours ,No function error
3 Mechanical
3.1 Dimension:	2378131 (mm)
3.2 Coating:	PWB front and back sides are sprayed additional adhesive coating.
3.3 Assembly:	The PSU should be mounted on a 700x700x5 AL plate or an equal dimension enclosure to get better cooling shown as below figure.
3.4 Screw Torque:	AC Connector Screw Torque Suggestion:13-18kgf.cm DC Connector Screw Torque Suggestion:9-11kgf.cm

①Shipping Fee
We offer a fixed shipping fee of $78 per order, regardless of size or weight, making shipping costs predictable and manageable.

②Handling Time
Orders for in-stock items are processed within 24 hours. Some items may require an additional 48-72 hours for processing, and we will notify you if this is the case.

③Delivery Time
Our typical delivery time is 3-7 days, depending on your location. In rare cases of delays due to weather, regulations, or holidays, we appreciate your understanding.

④Customs & Duties
Customs duties, taxes, and other import fees are the responsibility of the recipient. For specific requirements, please inform us before shipping.

⑤Tracking Your Order
You will receive a tracking number once your package is shipped. If you experience any issues, please contact us for assistance.

For more details, please see our [Complete Shipping Policy].

Click to enlarge

DELTA

Delta LED Power Supply DPS-500AB-57-A

$99.00

Add to compare

Add to wishlist

SKU: DPS500AB57A Categories: Switching Power Supply, Other Power Supply

Description


1 Electrical Requirements
ITEM	CONDITION	SPECIFICATION
1.1 Input Characteristics:
1.1.1 Input Rated Voltage:		100Vac~134.9V@80% of full load
1.1.1 Input Rated Voltage:		135Vac~ 240Vac@full load
1.1.2 Input AC Voltage Range:	90Vac~264Vac	Operate normal, function OK
1.1.2 Input AC Voltage Range:	300Vac@5s	The power supply shall withstand without damage
1.1.3 Input DC Voltage Range:	127Vdc~370Vdc	Operate normal, function OK
1.1.4 Input Rated Frequency:		50Hz~60Hz
1.1.5 Input Frequency Range:		47Hz~63 Hz
1.1.6 Input Current:	100Vac@80% of full load	5A(rms) Max.
1.1.6 Input Current:	240Vac@full load	2.6A(rms) Max.
1.1.7 Inrush Current:	Cold start,	≤30A
	115Vac@80% of full load 230Vac@ full load	≤60A
	@25℃
1.1.8 Efficiency:	230Vac/50Hz @ full load	³94%
1.1.9 Power Factory:	230Vac/50Hz @ full load	³0.95
1.1.9 Power Factory:	115Vac/60Hz @ 80% of full load Power factor correction is active type	³0.98
1.1.10 Harmonic Standard:	100Vac/60HZ@ 40%full load /80% of full load	JIS C 61000-3-2 class D EN 61000-3-2 class D
1.1.10 Harmonic Standard:	230Vac/50HZ@ 50%full load / full load	JIS C 61000-3-2 class D EN 61000-3-2 class D
1.1.11 Power Saving:	115Vac/60Hz	<6W
	230Vac/50Hz
	Under no load condition
1.1.12 AC Brown In/Out recovery:	@ 80% of full load	No damage
1.1.13 Line Voltage Sag & Surge:	Sag:	The output voltage shall remain 95% of output regulation spec.
	115Vac-80Vac-115Vac(5000ms-500ms-5000ms)
	230Vac-161Vac-230Vac(5000ms-500ms-5000ms);
	Loading: 80% of max. load Surge:
	132Vac-155Vac-132Vac(5000ms-500ms-5000ms);
	264Vac-293Vac-264Vac(5000ms-500ms-5000ms);
	Loading: 80% of max. load
1.1.14 AC Cycle Drop Out:	AC line voltage:	The output voltage shall remain 95% of output regulation spec.
	115Vac-0-115Vac(1000ms-10ms-1000ms);
	230Vac-0-230Vac(1000ms-10ms-1000ms);
	Output load: 80% of max. load
1.2 Output Characteristics:
1.2.1 Output Rated Voltage:	Measured at the end of DC terminals	+24V
1.2.2 Output Current:	90Vac~134.9Vac&127Vdc~179.9Vdc	0A to 16.72A(80% load)
1.2.2 Output Current:	135Vac~264Vac&180Vdc~370Vdc	0A to 20.9A(full load)
1.2.3 Output Voltage Regulation:	Input Voltage:90Vac~264Vac	+22.8V to +25.2V (5%)
1.2.4 Output power	Maximum continue	501.6W
1.2.5 Line Regulation:	Percentage difference between 135Vac@full load and 264Vac@full load	£ ±0.3%
1.2.6 Output Voltage Ripple and Noise:	Under any output load condition 0.1uF Ceramic Cap. and 47uF/50V Electrolysis Cap. Paralleled between the ends of output terminals. Bandwidth:20MHz	£240mVp-p @25℃
1.2.7 Turn-On Delay Time:	The output rise to 90% of the rated voltage @25℃ 230Vac full load/115Vac 80% of full load @-25℃ 230Vac full load/115Vac 80%	£ 1000ms
1.2.8 Hold Up Time:	The output falls to 90% of the rated voltage.input should be removed at phase 0°. 230Vac/115Vac with 80% of full load	³ 10ms
1.2.9 Rise Time:	The output rise from 10% to 90% of the rated voltage at 115Vac/80% of full load and 230Vac/ full load	£ 50mS
1.2.10 Output Overshoot/Undershoot Voltage:	Under any output load condition	£ 10% of rated output voltage
1.2.11 Load Transient Responses:	1.Max. step load:
	25% to 50% of full load and 50% to 75% of full load Frequency:50Hz~10kHz	Voltage tolerance limit 5% of Vo
	Duty cycle:50% S/R=1A/us
	Cap. Load:1000uF
	2.Max. step load:
	25% to 75% of full load Frequency:50Hz~10kHz Duty cycle:50% S/R=1A/us	Voltage tolerance limit 5% of Vo
	Cap. Load:1000uF	Voltage tolerance limit 5% of Vo
	3.Max. step load:0A to Max. load Frequency:50Hz~10kHz	No damage
	Duty cycle:50% S/R=1A/us
	Cap. Load:1000uF
1.2.12 Power De-rating:		Refer to figure 1 and figure 2
1.2.13 No load Operation:	Input voltage: 90Vac ~ 264Vac, Output Load :0A	There is no specification of
1.2.13 No load Operation:	Input voltage: 90Vac ~ 264Vac, Output Load :0A	voltage range, and PSU shall operate normally.
1.2.14 Maximum Capacitive Loading:	6000uF @25℃	Can start-up
1.2.15 Loop Gain	115Vac 60Hz/Load:0.2A/80% of full load 230Vac 50Hz/Load:0.2A/full load	1. Phase margin > 45deg
1.2.15 Loop Gain		2. Gain margin < -10dB 100% Derating
1.2.16	RL1 Thermal
1.3 Protection
1.3.1 Short Circuit Protection:	The power supply can withstand continuous short at DC output and will shut down and then auto recovery while remove fault condition.	No broken, No smoke Auto recovery
1.3.2 Over-Voltage Protection:	The PSU will shut down that means no output while over voltage occurs at output terminals that caused by internal fault.	26.4V~31.2V
1.3.3 Over Current Protection:	The power supply shall shut down automatically when over-current occurs at output terminal at 25’C.	26A~ 38A Auto recovery
1.3.4 Over Temperature Protection:	The output shall be protected at over-temperature condition.	No broken, No smoke Auto recovery OTP>70℃（the ambient temperature）@115V /13.38A load & @230V/16.72A load
2 Environmental Characteristics:
ITEM	CONDITION	SPECIFICATION
2.1 Humidity:	Operating Humidity:	20% ~ 95%RH
2.1 Humidity:	Shipping/Storage Humidity:	10% ~ 95%RH
2.2 Altitude:		Operating：0 to 5000M /Storage：0 to 5000M
2.3 Cooling:	Ventilation cooling
2.4 Immunity:
2.4.1 Electric Fast Transients(EFT):	Refer to IEC61000- 4-4	No function error
2.4.1 Electric Fast Transients(EFT):	Line to Line: +/- 2KV	No damage
2.4.2 Lightning Surge Immunity(Surge):	Refer to IEC 61000-4-5 Line to Line: +/- 1KV Line to Earth: +/- 2KV
	Refer to IEC 61000-4-5	No function error No damage
	Line to Line: +/- 2KV Line to Earth: +/- 4KV	No damage
2.4.3 Electron Static Discharge(ESD):	Refer to IEC61000-4-2	No function error. No damage
	Air Discharge: ± 15KV min.
	Contact Discharge: ±8KV min.
2.5 Electromagnetic Interference (EMI):		Class A,10db
2.6 Safety:
2.6.1 Safety Standards:	UL60950-1/IEC60950-1/EN60950-1
2.6.1 Safety Standards:	GB4943.1-2011/ IEC62368-1
2.6.2 Safety Certificate:		CB/UL/TUV/CCC/CE/BSMI/ KC/FCC
2.7 Leakage Current:	240Vac / 50Hz	£ 1mA
2.8 Earth Grounding:	Apply 30A current, test time: 60s (3s for production line)	<0.1 ohm
ITEM	CONDITION	SPECIFICATION
2.9 Insulation Resistance:	Apply DC 500V between AC input and secondary,AC input and FG,secondary and FG	>100MΩ
2.10 Dielectric Strength: (Hi-Pot):	1. Between AC input and secondary apply AC 3KV, test time 1 minute.	Cut off current < 10mA.
	2. Between AC input and earth ground apply AC 1.5KV, test time 1 minute.	Cut off current < 10mA. Cut off current < 10mA.
	3. Between secondary and earth ground apply DC 500V, test time 1 minute.
	For production line, test time of all above items will be 3 second.
2.11 Temperature:	Operating	-25 to 70°C（refer to 1.2.11 power de-rating curve，add not less than 700mm 700mm5mm aluminum plate auxiliary cooling）(the PSU shall turn on at -40°C full load)
2.11 Temperature:	Storage	-40 to +85°C
2.12 MTBF:	115Vac/60Hz load/16.72A @25℃ 230Vac/50Hz load/20.9A @25℃	168,000hrs
2.13 CAP. Life:	AC/115V, load/16.72A@40℃	>3 years
2.14 Burn-In:	AC/115V, load/10.45A, 40℃	4hours ,No function error
3 Mechanical
3.1 Dimension:	2378131 (mm)
3.2 Coating:	PWB front and back sides are sprayed additional adhesive coating.
3.3 Assembly:	The PSU should be mounted on a 700x700x5 AL plate or an equal dimension enclosure to get better cooling shown as below figure.
3.4 Screw Torque:	AC Connector Screw Torque Suggestion:13-18kgf.cm DC Connector Screw Torque Suggestion:9-11kgf.cm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Delta LED Power Supply DPS-500AB-57-A”

Get a Bulk Price Quote

Shipping & Delivery

Delta LED Power Supply DPS-500AB-57-A

Delta LED Power Supply DPS-500AB-57-A Specification

Reviews

G-energy G300V5 LED Display Power Supply

YHY YHP301AM5 LED Display Switching Power Supply

YHY YHP301A5-B2 LED Display Power Supply

YHY YHP201AS05-011 LED Display Power Supply

Meanwell SE-450 Series Switching Power Supply

Meanwell RSP-200 Series Switching Power Supply

Meanwell NES-15 Series Switching Power Supply

Meanwell NEL-200 Series Switching Power Supply

Delta LED Power Supply DPS-500AB-57-A

Delta LED Power Supply DPS-500AB-57-A Specification

Reviews

Related products