English
German
French
EnGenius-ENS202 | Outdoor LED Signs Wireless Solution
The EnGenius ENS202 can be applied on the outdoor led signs for wireless solutions, with its highly efficient 8dBi directional antenna with dual polarisation, provides an optimum, extended real outdoor throughput performance via point to point transmission in long-range distances.
$119.00
EnGenius ENS202 Long-Range Wireless 11n Outdoor Access Point/Client Bridge
The EnGenius-ENS202, with its highly efficient 8dBi directional antenna with dual polarisation, provides an optimum, extended real outdoor throughput performance via point to point transmission in long range distances.
EnGenius -ENS202 Key Features
- Long Range Outdoor CPE
- Access Point / Client Bridge
- 11 b/g/n – 300Mbps / 2T + 2R
- 8dBi directional antenna
- IP65 Waterproof housing
- Simplified AP Monitoring & Management using EZ Controller
The waterproof capabilities along with with the compact, robust design makes it ideal for harsh outdoor environments. Its advanced multi-operation modes (CB, AP, CR, WDS AP, WDS Bridge and WDS Station) integrated with Network Management Software “EZ Controller” offer a variety of uses in constructing scalable wireless networks of all possible applications also allowing centralised management via the user-interface.
EnGenius ENS202 – Technical Specifications
Software
- Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting
- PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
- PPTP Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
- VLAN Pass-through Support VLAN Pass-through
- WiFi Scheduling User could set a schedule for turning-on/off WiFi Radio
- Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all setting into a file via WEB
- Ping & Trace Route Built-in PING function & Trace Route function in Web GUI
Hardware Specifications
- MCU Atheros AR9341
- Physical Interface 2 x RJ-45 for 10/100 Fast Ethernet 1 x Reset Button
- Power Requirements Active Ethernet (Power over Ethernet)
- Proprietary PoE design
- Power Adapter 24V / 0.6A
RF Specifications
- Available transmit power (ERIP) 19dBm
- Frequency Band 802.11b/g/n
- Data Rate 300Mbps
- Antenna 8dBi
- Operation Mode Access Point / Client Bridge / Client Router / WDS
Wireless/Network
- Auto Channel Selection (Setting varies by Regular Domains)
- Obey Regulatory Power
- Distance Control (802.1x Ack timeout)
- CLI Supported
- 802.1x Supplicant (CB Mode)
- Multiple SSID (4 SSID), BSSID
- WDS AP / WDS Bridge / WDS Station
- Multicast Supported
- RADIUS Accounting
- VLAN Tag / VLAN Pass-through
- Auto Reboot
- WiFi Scheduling
Security
- WEP Encryption-64/128/152 bit
- WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
- WPA/WPA2 Enterprise (WPA-EAP using TKIP)
- Hide SSID in beacons
- MAC address filtering, up to 50 field
- Wireless STA (Client) connected list
QoS
- WMM
Temperature Range
- Operating -20°C~70°C
- Storage -30°C to 80°C
Humidity (non-condensing)
- 0%～90% typical
Dimensions
- 186mm (L) x 100mm (W) x 29mm (H)
Weight
- 300g
Package contents
- 1 x ENS202
- 1 x Power Adapter (24V/0.6A)
- 1 x PoE Injector (EPE1212)
- 1 x Pole mounting kit
- 1 x Screw Set
Reviews
There are no reviews yet.