G-energy JPS200P 5V40A LED Display Power Supply

G-energy JPS200P 5V40A LED Display Power Supply Description

G-energy JPS200P has the characteristics of small volume, high efficiency, stable operation and high reliability. Power supply has input overvoltage, output current limiting, output short circuit and so on. Power supply using synchronous rectifier circuit greatly improve the power efficiency, saving energy; this power is wide voltage input, wide ambient temperature work, with a power factor correction circuit, a wide range of applications.

You may be interested in Rental LED Panels Manufacturer

 G-energy JPS200P LED Power Supply Parameters

Item	Description	Tech Spec	Unit	Remark
1	Working Temperature	-30—60	℃
2	Storing Temperature	-40—80	℃
3	Relative humidity	10—60	%
4	Heat Dissipation Method	Natural cooling
5	Air Pressure	80—106	Kpa
6	Height of Sea Level	2000	m
Electrical character
1	Input character
Item	Description	Tech Spec	Unit	Remark
1.1	Rated Voltage Range	100-240	Vac
1.2	Input Frequency Range	47—63	Hz
1.3	Efficiency	≥89	%	Vin=220Vac Output Full Load（at room temperature)
1.4	Efficiency Factor	≥0.95		Vin=220Vac Rated input voltage, output full load
1.5	Max Input Current	≤2.5	A
1.6	Dash Current	≤120	A	Vin=220Vac Cold state test
2	Output characteristics
Item	Description	Tech Spec	Unit	Remark
2.1	Output voltage rating	5	Vdc
2.2	Output current range	0—40.0	A
2.3	Output voltage adjustable range	4.85—5.15	Vdc
2.4	Output voltage range	±1%	VO
2.5	Load Regulation	±1%	VO
2.6	Voltage stability accuracy	±2%	VO
2.7	Output Ripple and Noise	≤150	mVp-p	Rated input, output full load, 20MHz bandwidth, load side and 47uf / 104 capacitor
2.8	Start output delay	≤3.5	s	Vin = 220Vac test
2.9	Output Voltage Raise Time	≤50	ms
2.1	Switch machine overshoot	±5%	VO	Test conditions: full load, CR mode
2.11	Output dynamic	The voltage change is less than ±5% VO ; the dynamic response time is less than 250us		LOAD 25%-50%-25% 50%-75%-50%
3	Protection characteristics
Item	Description	Tech Spec	Unit	Remark
3.1	Input voltage shortage protection	60-80	VAC	Test conditions: full load
3.2	Input under-voltage recovery point	75-88	VAC
3.3	Output limited Protection	48-60	A	HI-CUP hiccups self-recovery, avoid long-term damage to power after a short-circuit power.
3.4	Output short circuit protection	≥48.0	A	HI-CUP hiccups self-recovery, avoid long-term damage to power after a short-circuit power.
Note:
4	Others
Item	Description	Tech Spec	Unit	Remark
4.1	MTBF	≥40,000	H
4.2	Leakage current	＜10mA(Vin=220Vac)		GB8898-2001
				9.1.1 Test method
Production Compliance characteristics
Item	Description		Tech Spec		Unit
1	Electric Strength	Input to output	3000Vac/10mA/1min		No arcing, no breakdown
2	Electric Strength	Input to ground	1500Vac/10mA/1min		No arcing, no breakdown
3	Electric Strength	Output to ground	500Vac/10mA/1min		No arcing, no breakdown

Document Download

G-energy JPS200P（5.0）Specification English Version 

Attention For Application

1. Power supply to be safe insulation, any side of the metal shell with the outside should be more than 8mm safe distance. If less than 8mm need to pad 1mm thickness above PVC sheet to strengthen the insulation
2. Safe use, to avoid contact with the heat sink, resulting in electric shock
3. PCB board mounting hole stud diameter not exceeding 8mm
4. Need an L315mm*W90mm*H3mm aluminum plate as an auxiliary heat sink

Packaging, transport, storing

1. Packaging
Packing box on the product name, model, manufacturer logo, the quality of the manufacturer’s inspection certificate, the date of manufacture.
2. Transport
Suitable for car, ship, air transport, transportation should awnings, sun protection,
civilized handling.
3. Storing
When the product is not in use should be stored in the box, the warehouse ambient
temperature -10℃—+80 ℃, the relative humidity of 10% -90%, the warehouse does not allow
harmful gases, flammable, explosive products and corrosion Chemical products, and no strong mechanical vibration, shock and strong magnetic field, the box should be at least 20cm away from the ground, from the wall, heat, window or air inlet at least 50cm, under the conditions of the storage period is generally 2 years，more than 2 years should be re-tested.

Label