Linsn SC801 Single Mode LED Fiber Convertor
System Overview:
The introduction of long-distance optical fiber transmission system, fiber optic transmission of this technology, the LED display
control signal can be transmitted to longer distances, to ensure the integrity of the signal so that the whole LED display system
more stable, reliable and convenient.
$100.00
Size: 14.0CM×8.7CM (with fixed bracket: 11.4CM×2.8CM),diameter of positioning hole is 0.35CM
Power Supply: 110V~230V,50Hz/60Hz
Data Interface:RJ45 for network cable;SC mode optical connector
Singlemode Transmission:20KM
Wave-length: Multimode: 850nm Singlemode: 1310nm
Optical-Power Multimode:about -8db; Singlemode: -6db~-8db
Linsn LED Fiber Convertor Features:
1.Gigabit transmission is standard physical layer technologies.
2.single-mode fiber transmission distance up to 20KM, multi-mode fiber up to 500M.
3.large load force, master control system for the 2048 × 1536, can cascade, cascading multiple screens can be used in the same format of a system support.
4.led sender can support multiple led receiver (that is, any multi-block display, split screen).
5.Perfect picture, red and green can be independently any correction, any brightness adjustment.
6.indoor and outdoor-compatible set of cards can be 1/16, 1/8, 1/4, 1/2, and static scanning.
7.it can be remotely switch the big screen, the display brightness can be adjusted automatically.
8.Transmission Card transmission part adopts electromagnetic isolation technology, support hot plug.
9.high-bandwidth transmission bandwidth of up to GB level and above.
10.master card reliability, versatility, excellent on-screen circuits are no special requirements.
Reviews
There are no reviews yet.