Meanwell HSN-300-4.2A|HSN-300-4.2B|HSN-300-5A|HSN-300-5B

Available: In Stock

SKU: MWHSN300

•Low leakage current<1mA
•Protections: Short circuit / Overload / Over voltage / Over temperature
•Cooling by free air convection
•Low profile:31mm
•Conformal coated
•LED indicator for power on
•Low cost, high power reliability
•100% full load burn-in test
•2 years warranty

$47.99 – $48.99

Type Number

Clear

$47.99 – $48.99

type-number HSN-300-4.2A HSN-300-4.2B HSN-300-5A HSN-300-5B

Clear selection

Meanwell HSN-300 Series LED Display Power Supply Description

MODEL		HSN-300-4.2A	HSN-300-4.2B	HSN-300-5A	HSN-300-5B
OUTPUT	DC VOLTAGE	4.2V	4.2V	5V	5V
	RATED CURRENT Note.2	50A	60A	50A	60A
	CURRENT RANGE	0 ~ 50A	0 ~ 60A	0 ~ 50A	0 ~ 60A
	RATED POWER(convection)	210W	252W	250W	300W
	RIPPLE & NOISE (max.) Note.3	150mVp-p	150mVp-p	150mVp-p	150mVp-p
	VOLTAGE ADJ. RANGE	3.6~4.4V	3.6~4.4V	4.5~5.5V	4.5~5.5V
	VOLTAGE TOLERANCE Note.4	±3.0%	±3.0%	±3.0%	±3.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%
	LOAD REGULATION	±2.0%	±2.0%	±2.0%	±2.0%
	SETUP, RISE TIME	2500ms, 100ms/230VAC; 2500ms, 100ms/115VAC
	HOLD UP TIME (Typ.)	10ms/230VAC; 8ms/115VAC at full load
INPUT	VOLTAGE RANGE	90~132VAC or 254~373VDC	180~264VAC or 254~373VDC	90~132VAC or 254~373VDC	180~264VAC or 254~373VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	0.85		0.86
	AC CURRENT (Typ.)	3.0A/230VAC; 5.0A/115VAC
	INRUSH CURRENT (Typ.)	Cold start 90A/230VAC
	LEAKAGE CURRENT	<1mA
PROTECTION	OVERLOAD	A Type:105~170% rated output power B Type:105~140% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	SHORT CIRCUIT	Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	4.7 ~ 5.7V
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER TEMPERATURE	Protection type : Shut down O/P voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +70℃(Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85℃, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/℃ (0 ~ 60℃)
	VIBRATION	10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC	SAFETY STANDARDS	UL60950-1, EAC TP TC 004 approved
(Note 5)	WITHSTAND VOLTAGE	I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/ 70%RH
	EMC EMISSION	Refer to EN55022 (CISPR22) Class A, EAC TP TC 020
	EMC IMMUNITY	Refer to EN61000-4-5; light industry level (surge 4KV), criteria A, EAC TP TC 020
OTHERS	MTBF	226.4K hrs min. MIL-HDBK-217F (25℃)
	DIMENSION	2108131mm (LWH)
	PACKING	0.67kg; 20pcs/14.4kg/0.91CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated oad and 25℃ of ambient temperature.
	2. Please refer tolstatic characteristics".
	3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parae capacitor.
	4. Tolerance : line regulation and load regulation.
	5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
	6. The power supply is considered a component which wi be instaed into a fina equipment. The fina equipment must be re-confirmed that it still meets EMC directives.