Novastar A4/A4s Receiving Card Description

The Novastar A4 and A4S are compact, high-performance receiving cards designed for stable and precise control of small to medium-sized LED displays. Supporting pixel-level brightness and chroma calibration, 3D output, gamma control, and smart module integration, the A4 / A4S ensures uniform visuals, low-latency playback, and high reliability across rental and fixed installations.

Product Features:
Improvements to Display Effect
● Pixel-level brightness and chroma calibration
Working with NovaLCT and a calibration platform (CalCube MiniLED V1.1.0 or later recommended), the receiving card supports brightness and chroma calibration on each LED, which can effectively remove brightness differences and chroma differences and greatly improve display brightness consistency and chroma consistency, allowing for better image quality.
● Quick adjustment of dark or bright lines
The dark or bright lines caused by the splicing of cabinets or modules can be adjusted to improve the visual experience. This function is easy to use, and the adjustment takes effect immediately.
● 3D function
Working with the sending card that supports 3D function, the receiving card supports 3D image output.
● Individual gamma adjustment for RGB
Working with NovaLCT (V5.2.0 or later) and the sending card that supports this function, the receiving card supports individual adjustment of red gamma, green gamma and blue gamma, which can effectively control image non-uniformity at low grayscale conditions and white balance offset, allowing for a more realistic image.
● Image rotation in 90° increments
The display image can be set to rotate in multiples of 90° (0°/ 90°/180°/270°).

Improvements to Maintainability
● Smart module (dedicated firmware required)
Working with the smart module, the receiving card supports module ID management, storage of calibration coefficients and module parameters, monitoring of module temperature, voltage and flat cable communication status, LED error detection, and recording of the module run time.
● Quick uploading of calibration coefficients
The calibration coefficients can be quickly uploaded to the receiving card, greatly improving efficiency.
● Module Flash management
For modules with flash memory, the information stored in the memory can be managed. The calibration coefficients and module ID can be stored and read back.
● One click to apply calibration coefficients in the Flash module
For modules with flash memory, when the Ethernet cable is disconnected, users can hold down the self-test button on the cabinet to upload the calibration coefficients in the flash memory of the module to the receiving card.
● Mapping function
The cabinets display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.
● Setting of a pre-stored image in the receiving card
The image displayed during startup, or displayed when the Ethernet cable is disconnected or there is no video signal, can be customised.
● Temperature and voltage monitoring
The temperature and voltage of the receiving card can be monitored without using peripherals.
● Cabinet LCD
The LCD module connected to the cabinet can display the temperature, voltage, single run time and total run time of the receiving card.
● Bit error detection
The Ethernet port communication quality of the receiving card can be monitored, and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.
● Status detection of dual power supplies
When two power supplies are used, their working status can be detected by the receiving card.
● Firmware program readback
The firmware program of the receiving card can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.
● Configuration parameter readback
The configuration parameters of the receiving card can be read back and saved to the local computer.
● LVDS transmission (dedicated firmware required)
Low-voltage differential signalling (LVDS) transmission is used to reduce the number of data cables from the hub board to the module, increase the transmission distance, and improve the signal transmission quality and electromagnetic compatibility (EMC).

Improvements to Reliability
● Loop backup
The receiving cards and the sending card form a loop via the primary and backup line connections.
When a fault occurs at a location of the lines, the screen can still display the image normally.
● Dual backup of configuration parameters
The receiving card configuration parameters are stored in the application area and factory area of the receiving card at the same time. Users usually use the configuration parameters in the application area. If necessary, users can restore the configuration parameters in the factory area to the application area.
● Dual program backup
Two copies of the firmware program are stored in the receiving card at the factory to avoid the problem that the receiving card may get stuck due to a program update exception.

Novastar A4S Receiving Card Specification:

Novastar A4s A5s A7s A8s A9s A10s Plus Comparison:

Download Resource:
Novastar A4s-Receiving-Card-Specifications-V2.1.4