Novastar Receiving Card DH418| LED Receiving Card
Novastar DH418 receiving card is one of the best and most reliable Novastar LED receiving cards. This receiver card comes with some highly reliable and impressive features to enhance, improve, and advance the graphical outcome of your LED display screen.
Novastar Receiving Card DH418| LED Receiving Card Description
One of the best and most reliable Novastar LED receiving card options include the model DH418. This receiver card comes with some highly reliable and impressive features to enhance, improve, and advance the graphical outcome of your LED display screen. Briefly, you cans y that this one comes with everything you’d want in your LED receiving card.
With the presence of this universal LED receiving card, you can easily manage and set any and every LED display’s graphics according to your detailing requirements. Also, this means that you don’t have to worry about the connected device’s limitations, as it can be connected with any PC setup easily. Other than that, this card comes with up to 256 x 256 loaded pixels and 16 groups of RGB. Additionally, you also get 8 HUB75 interfaces that serve you with extreme reliability and stability for your LED display. And with a RoHs certification, this cost-effective DH418 can be the best option for P10 LED displays. So there’s no sort of limitations you need to worry about with this cost-effective option around.
Lastly, the presence of the DH418’s fast light and dark line adjustment support also makes it a highly reliable option that comes with more advanced editing and adjustment settings for you.
●Display Performance Improvement
Support for lighting chromaticity correction
With NovaLCT and NovaCLB, the brightness of each lamp point
Corrected with chromaticity.
fast bright and dark line adjustment
Quickly bright and dark line adjustment on NovaLCT to eliminate
A gap between the light board and the light board, the box body and the box body.
With independent masters that support 3D capabilities, at NovaLCT or
Turn on the 3D function on the operator panel of the main control and set the 3D parameters.
The number causes the display screen to display a 3D effect.
− 192×256 (PWM IC)
− 176×256 (General Purpose IC)
Target box after enabling Mapping on NovaLCT
The receiving card number and network port information will be displayed, which can be clearly obtained.
Receive card location and routing method.
Receive card pre-stored screen settings
The specified picture can be set to the display on NovaLCT
The screen when the startup screen, network cable is disconnected, or when there is no video source signal.
Temperature and voltage monitoring
Can monitor its own temperature and voltage without the need for other peripherals,
The temperature and voltage of the receiving card can be viewed on the NovaLCT.
Supports Nova’s universal 5pin LCD module. For display connection
Card temperature, voltage, single run time and total run time
With NovaLCT (V5.2.0 and above), the receiving card is connected
During the communication, the data loss on the transmission link is monitored.
Firmware program readback
Can read back the receiving card on NovaLCT (V5.2.0 and above)
The firmware program is saved to the local.
Configuration parameters read back
Readback card configuration parameters can be read back and saved on NovaLCT
Go to the local.
Increase the reliability of the series connection of the receiving card through the master-slave redundancy mechanism.
In the standby line, when one of the lines fails, the other
A line will work instantly to ensure that the display is working properly.
Configuration parameters dual backup
Save two receiving card configurations on the receiving card via NovaLCT
Parameters, one of which is used as a backup parameter.
Dual program backup
The receiving card is shipped with two applications saved in case the program is more
The upgrade caused by the new exception is stuck.
●Novastar DH418 LED Receiving Card Interface
|Electrical Specifications||Input voltage||DC 3.3V~5.0V|
|Rated power consumption||2.5W|
|working environment||Operating temperature||`-20℃~+70℃|
|Storage temperature||10%RH~90%RH No condensation|
|Physical specification||Dimension||95.5 * 109.1 * 17.2(mm)|
|Certification Information||Passed RoHS certification|