Novastar Receiving Card DH436 LED Receiving Card

Novastar DH436 Receiving LED Card Description

The DH436 is a small-pitch receiving card developed by Nova Technology. A single card supports a maximum load of 512×384 pixels (NovaLCT version V5.3.0 or higher required). It supports features such as brightness calibration, quick adjustment of dark and bright lines, 3D, and independent RGB gamma adjustment, all of which enhance the display effect and improve the user experience. The DH436 uses 6 HUB320 (26-pin) interfaces, offering high stability. It supports up to 24 groups of RGB parallel data and 64 groups of serial data, making it suitable for various on-site setup environments.

Product Features:
● Brightness Calibration
Supports pixel-level brightness calibration to remove brightness discrepancies, ensuring high consistency.
● Quick Adjustment of Dark or Bright Lines
Allows quick adjustment of dark or bright lines caused by module splicing, with immediate effect.
● 3D Functionality
Supports 3D image output when used with sending cards that support 3D functionality.
● Individual RGB Gamma Adjustment
Provides independent gamma adjustment for red, green, and blue channels to correct image nonuniformity, especially in low grayscale.
● Mapping Function
Displays the receiving card number and Ethernet port information, making it easy to locate and route receiving cards.
● Pre-Stored Screen Settings
Supports the setting of a pre-stored image to be displayed when the screen starts, when the Ethernet cable is disconnected, or when no video signal is present.
● Temperature and Voltage Monitoring
Monitors the receiving card’s temperature and voltage without needing additional peripherals.
● LCD Module Support
Supports the display of temperature, voltage, and runtime using an LCD module integrated into the cabinet.
● Bit Error Rate (BER) Monitoring
Monitors Ethernet port communication quality and tracks the number of erroneous packets to assist with troubleshooting.
● Firmware Program Readback
Enables readback of the receiving card’s firmware, which can be saved locally for backup.
● Configuration Parameters Readback
Allows readback of configuration parameters and saves them locally for backup or restoration.
● Loop Backup
Provides redundancy by forming a loop with the receiving and sending cards, ensuring continuous image display even if one line fails.
● Dual Program Backup
Two copies of the firmware program are stored in the receiving card to avoid issues during updates or software failure.
● Certifications:
RoHS、EMC Class A

Novastar DH436 Receiving LED Card Specification

Download Resource:
Novastar Receiving Card DH436 LED Receiving Card Specification(Chinese)-V1.1.0