You searched for fiber converter | Page 2 of 3

09 / November, 2018

Colorlight 5A-75E Receiving Card

Colorlight 5A-75E Receiving Card Description

Features

·Integrated HUB75 interface, more convenient with less cost.

·ReduceS the plug connectors and malfunction, lower failure rate.

·Superior display quality: high refresh rate, high grayscale, and high brightness with the conventional chips.

·Perfect performance under lower grayscale status.

·Better detail processing: partial dark at row, reddish at low gray, shadow problems can be solved.

·Supports high-precision point-by-point calibration in the Brightness and the chromaticity.

·Supports conventional chips, PWM chips and lighting chips.

·Supports any scan mode from static to 64 scans.

·Supports any pumping point and data arbitrary offset to realize various freeform displays, spherical displays, creative displays, etc.

·Supports 32 groups of RGB signal output.

·Large loading capacity.

·Advanced design, high-quality components, rigorous aging test, zero malfunction of final products.

·Wide working voltage range with DC3.3~5.5V.

·Compatible with all series of Colorlight’s sending devices.

Control system parameters
Sending device	All series of Colorlight’s sending devices
Control area of every card	Full-color: 256×512 pixels
Correction area of every card	256×512 pixels
Network port exchange	Supported, arbitrary use
Synchronization	Nanosecond synchronization between the card and the card

Display module compatibility
Chip support	Supports conventional chips, PWM chips, lighting chips and other mainstream chips
Scan type	Supports static sweep to 64 scans
Module specifications support	Supports 8192 pixels within any row, any column
The direction of the cable	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data groups	32 RGB data groups
Data folded	Supports 2 splits, 4 splits in the same direction
Data exchange	32 groups of data for any exchange
Module snapshot	Supports any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc in the form of serial

Compatible device and interface type
Communication distance	UTP cable≤140m CAT6 cable≤170m Optic fiber: Single Mode Fiber Converter≤20km Multi-Mode Fiber Converter ≤550m (Use RP Repeater to extend unlimited)
Compatible with transmission equipment	Gigabit switch, fiber converter, optical switches
Power interface	Wire terminal
HUB Interface Type	HUB75

Physical parameters
Size	143×93mm
Input voltage	DC 3.3V~5.5V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body static resistance	2KV
Weight	100g

Monitoring function (in conjunction with mutil-function card)
Monitoring functions	Real time monitoring environment information like temperature, humidity, smog
Remote Control	Supports for relay switch to turn on/off the power supply of equipments remotely

Other features
pixel level calibration	Supported
Loop Backup	Supported
Shaped screen	Supports various freeform display, spherical display, creative display, etc. through the data arbitrary offset

0 comment

24 / June, 2021

Novastar VX400 | VX600 | VX1000 All-in-One Controller

Novastar VX1000 All-in-One Controller| Novastar VX600 All-in-One Controller Description

Novastar VX1000 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box.VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch applications.

10 Ethernet ports of output provide 6.5 million pixels of loading capacity
A single unit can output a maximum width of 10,240 pixels, with a maximum height of 8,192 pixels

4K x 1K@60Hz high resolution input, 4K x 1K point to point display
3 x 4K layers, free scaling for each layer

4K x 1K@60Hz high resolution input, 4K x 1K point to point display — 4K x 1K@60Hz high-resolution input, 4K x 1K point to point display.

Video Controller, ByPass, Fiber Converter, free switching between three modes

Support for redundant input source, system configuration, ethernet ports, and devices Providing total security from start to finish

Document Download

0 comment

05 / June, 2021

Colorlight E80 Receiving Card

Colorlight E80 Receiving Card Description

Features

·Integrated HUB75 interface, more convenient with less cost

·Reduces the plug connectors and malfunction, lower failure rate

·Superior display quality: high refresh rate, high grayscale, and high brightness with the conventional chips

·Perfect performance under lower grayscale status

·Better detail processing: partial dark at row, reddish at low gray, shadow problems can be solved

·Supports high-precision pixel level calibration in the brightness and the chromaticity

·Supports conventional chips, PWM chips, Silan chips and lighting chips

·Supports up to 1/64 scan

·Supports any pumping point and data group offset to realize various freeform display, spherical display, creative display, etc.

·Supports any pumping row and pumping column

·Supports 16 groups of RGB signal outputs

·Large loading capacity

·Wide working voltage range with DC 3.8V~5.5V

·Compatible with all series of Colorlight sending devices

Control system parameters
Control area of every card	Full-color: PWM chips:384×512 pixels, conventional chips: 256×512 pixels, Silan chips: 324×512 pixels The column can be extended to 1024 pixels for special applications.
Calibration Area	PWM chips: 384×512 pixels, conventional chips: 256×512 pixels, Silan chips: 324×512 pixels
Cascade Control Area	65536×65536 pixels
Network Port Exchange	Support, arbitrary use
Synchronization	Nanosecond synchronization between cards

Display module compatibility
Chip Supports	Supports conventional chips, PWM chips, Silan chips, lighting chips and other mainstream chips
Scan Type	Supports up to 1/64 scan
Module Specifications Support	Supports 8192 pixels within any row, any column
Cable Direction	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data groups	16 RGB data groups
Data folded	Supports 2~8 any discount
Data exchange	16 groups of data for any exchange
Module snapshot	Supports any pumping point
Data serial transmission	RGB, R8G8B8, R16G16B16, etc in the form of serial

Compatible device and interface type
Communication distance	UTP cable≤140m CAT6 cable≤170m Optic fiber transmission distance unrestricted
Compatible with transmission equipment	Gigabit switch, fiber converter, optical switches
DC Power Interface	Wafer VH3.96mm-4P Barrier Terminal Block-8.25mm-2P
HUB Interface Type	HUB75

Physical parameters
Size	85.9×91.69mm
Input voltage	DC 3.8V~5.5V
Rated current	0.6A
Rated power	3W
Storage and transport temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body static resistance	2KV
Weight	57.5g

Other features
Brightness Calibration	Supported
Chromaticity Calibration	Supported
Shaped screen	Supports data group offset to realize various freeform display, spherical display, creative display, etc.

0 comment

05 / June, 2021

Colorlight i5+ Receiving Card

Colorlight i5+ Receiving Card Description

Features

·Tiny size:67.6×35.46mm, DDR2 SODIMM interface, easy for maintenance

·Supports 32 groups of RGB signal output

·Loading capacity: 512×384 pixels

·High-precision pixel level calibration in the brightness and the chromaticity

·Supports better gray at low brightness and color temperature adjustment

·Supports pumping row and pumping column

·Fast upgrades and fast sending out calibration coefficients

·Supports smart module to save calibration coefficients and other information on module

·Temperature, humidity and power supply monitoring on cabinet

·Supports up to 1/64 scan, and support decoding IC like 74HC595

·Supports any pumping point, and various free-form displays like spherical display, creative display, etc. through data group offset

· Wide working voltage range with DC 3.3~5.5V

·Compatible with all series of Colorlight’s sender cards

Control system parameters
Capacity	Full-color: 512×256 pixels
Network Port Exchange	Supported, arbitrary use
Gray Level	Maximum 65536 levels

Display module compatibility
Chip Supports	Supports conventional chips, PWM chips and other mainstream chips
Scan Mode	Two scanning methods to support refresh rate multiplier
Scan Type	Supports static sweep to 1/64 scan
Module Specifications Support	Supports 8192 pixels within any row, any column
Cable Direction	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets	32 RGB data sets
Data folded	Supports 1~8 any discount to improve refresh rate
Data exchange	32 sets of data any exchange
Module snapshot	Supports any pumping point

Compatible device and interface type
Communication distance	UTP cable≤140m CAT6 cable≤170m OPTIC FIBER transmission distance unrestricted
Compatible with transmission equipment	Gigabit switch, fiber converter, optical switches

Physical parameters
Size	68×36mm
Input voltage	DC 3.3V~6V
Rated current	0.5A
Rated power	2.5W
Operating Temperature	-25℃~75℃
Weight	9.5g

Pixel level calibration
Brightness Calibration	Supported
Chromaticity Calibration	Supported

0 comment

05 / June, 2021

Colorlight i9 Receiver Card

Colorlight I9+ LED Receiving Card Description

Colorlight i9 receiver card is Colorlight specially introduced for the general projects, featuring a small size with 68*36mm; It adopts a DDR2 SODIMM interface, which can easily be integrated into the HUB board or unit plate of LED display.It supports 30bit video input, meets the HDR@4K standard.

·Tiny size: 67.6×35.46mm, DDR2 SODIMM interface, easy for maintenance

·Supports 32 groups of RGB signal output

·Loading capacity: 384×256 pixels

·Low latency

·Supports HDR

·Supports pixel level calibration in the brightness and the chromaticity with 14bit accuracy

·Better gray at low brightness

·Supports color temperature and gamut adjustment

·Supports highlight and sorting

·Advanced seam compensation

·Fast upgrades and fast sending out calibration coefficients

·Supports smart module to save calibration coefficients and other information on module

·Temperature, humidity, power supply voltage monitoring on cabinet and fan rotating control

·Cable Detection

·Supports receiver card backup and power supply backup

Control system parameters
Capacity	Full-color: 384×256 pixels
Network Port Exchange	Supported, arbitrary use
Gray Level	Maximum 65536 Levels

Display module compatibility
Chip Supports	PWM chips，Silan chips
Scan Type	Supports static sweep to 1/64 scan
Module Specifications Support	Supports 8192 pixels within any row, any column
Cable Direction	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets	32 RGB data sets
Data Folded	Supports 1~8 any discount to improve refresh rate.
Data Exchange	32 sets of data any exchange
Module Snapshot	Supports any pumping point

Compatible device and interface type
Communication Distance	UTP cable≤140m CAT6 cable≤170m OPTIC FIBER transmission distance unrestricted
Compatible with Transmission Equipment	Gigabit switch, fiber converter, optical switches
Size	67.6×35.46mm
Input Voltage	DC 3.3V~6V
Rated Current	0.5A
Rated Power	2.5W
Storage and Transport Temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body Static Resistance	2KV
Weight	9.5g

Monitoring function (in conjunction with multi-function card)
Temperature Monitoring	Cabinet temperature monitoring between -25℃ ~ 75℃ 1 port for each card
Humidity Monitoring	One port to monitor receiver card humidity range with 20% ~ 95% 1 port for each card
Bit Error Monitoring	Monitoring the total number of data packets and error rate to check network quality
Supply Voltage Monitoring	5 ports for supply voltage monitoring
Smoke Monitoring	One port for smoke monitoring and can work with relay to activate an alarm and turn off the display screen 1 port for each card
Full Color LCD Display Panel	Supports full color LCD display panel

Pixel level calibration
Brightness Calibration	Supported
Chromaticity Calibration	Supported

Other features
Hot Backup	Supports loop backup, double sender backup,
Shaped Screen	Supports various freeform display, spherical display, creative display, etc. through the date arbitrary offset

0 comment

05 / June, 2021

Colorlight i9+ Receiving Card

Colorlight I9+ LED Receiving Card Description

The Colorlight i9+ is a small, high-end universal receiver card from Carlet, measuring just 67.60 x 35.46mm.
The i9+ adopts the DDR2 SODIMM interface, which can be easily integrated into the adapter board or the display unit board. The display module is highly integrated, and the design of the display unit board and structure is more flexible and convenient.
The i9+ has all the features of the current mainstream receiving card, and has developed a series of practical and powerful functions for high-end displays, bringing value-added points to customers’ products and enhancing product added value. The i9+ is perfect for high-end rental displays and small-pitch LED displays.

·Supports 32 groups of RGB signal output

·Loading capacity: 512×384 pixels

·Low latency

·Supports HDR

·Supports brightness and chromaticity point-by-point calibration

·Better gray at low brightness

·Supports color temperature and gamut adjustment

·Supports highlight and sorting

·Seam compensation

·Support any pumping row, pumping column and pumping point

·Supports smart module to save calibration coefficients and other information on module

·Temperature, humidity, power supply voltage monitoring on cabinet and fan rotating control

·Supports network cable status monitoring

·Supports any scan type from static to 64 scan

Control system parameters
Capacity	Full-color: 512×384 pixels
Network Port Exchange	Supported, arbitrary use
Gray Level	Maximum 65536 Levels

Display module compatibility
Chip Supports	PWM chips
Scan Type	Supports static sweep to 1/64 scan
Module Specifications Support	Supports 16384 pixels within any row, any column
Cable Direction	Supports route from left to right, from right to left, from top to bottom, from bottom to top
Data Sets	32 RGB data sets
Data Folded	Supports 2~8 any discount to improve refresh rate.
Data Exchange	32 sets of data any exchange
Module Snapshot	Supports any pumping point

Compatible device and interface type
Communication Distance	UTP cable≤140m CAT6 cable≤170m OPTIC FIBER transmission distance unrestricted
Compatible with Transmission Equipment	Gigabit switch, fiber converter, optical switches
Size	67.6×35.46mm
Input Voltage	DC 3.3V~6V
Rated Current	0.5A
Rated Power	2.5W
Storage and Transport Temperature	-50℃~125℃
Operating Temperature	-25℃~75℃
Body Static Resistance	2KV
Weight	9.5g

Monitoring function (in conjunction with multi-function card)
Temperature Monitoring	Cabinet temperature monitoring between -25℃ ~ 75℃ 1 port for each card
Humidity Monitoring	One port to monitor receiver card humidity range with 20% ~ 95% 1 port for each card
Bit Error Monitoring	Monitoring the total number of data packets and error rate to check network quality
Supply Voltage Monitoring	4 ports for supply voltage monitoring
Full Color LCD Display Panel	Supports full color LCD display panel

Pixel level calibration
Brightness Calibration	Supported
Chromaticity Calibration	Supported

Other features
Hot Backup	Supports loop backup, double sender backup,
Shaped Screen	Supports various freeform display, spherical display, creative display, etc. through the date arbitrary offset

0 comment

04 / June, 2021

Colorlight S6F HD Sender | Fast Shipping

Colorlight S6F HD Sender Description

Features
·Video input ports including 1 HDMI with loop, 1 DVI with loop;

·Support input resolution up to 1920×1200@60Hz;

·Loading capacity: 2.3 million pixels, Maximum width: 4096 pixels, Maximum height: 2560 pixels;

·6 Gigabit Ethernet ports support screen arbitrary splicing;

·Supports 3 optical fiber outputs;

·Dual USB2.0 for high-speed configuration and easy cascading;

·Supports splicing and cascading among several senders with synchronization strictly;

·Supports control via 100M Ethernet;

·Supports brightness and chromaticity adjustment;

·Supports improved gray-scale at low brightness;

·Supports HDCP;

·Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight.

Video Source Interface
Interface Type	1×HDMI+1×DVI+1×HDMI_LOOP+1×DVI_LOOP
Input Resolution	1920×1200 pixels maximum
Video Source Frame Rate	60Hz, supports auto-adjustment
Receive Area	Can be set freely

Gigabit Ethernet Output
Net Port Number	6 Gigabit Ethernet ports
Control Area	2.3 million pixels maximum Maximum width: 4096 pixels, Maximum height: 2560 pixels
Transmission Distance	CAT5≤140m, CAT6≤170m, Optical fiber: No limitation
Cascading	Up-down or left-right cascading defined by user
Transmission Mode	Frame mode (Gigabit Ethernet) with CRC
Video Source Frame Rate	60Hz, supports auto-adjustment
Receive Area	Can be set freely

Optical Fiber Port
Port Number	3 optical fiber ports
Transmission Distance	No limitation
Fiber Port	Dual-LC ports

Connection Equipment
Receiving Card	Compatible with all series of Colorlight receiving card
Peripherals	Multifunction card, optical fiber converters, Gigabit switcher

Specification
Size	1U Standard box
Input Voltage	AC 100~240V
Rated Power Consumption	20W
Weight	2kg

0 comment

03 / March, 2021

Colorlight X1 Controller | Colorlight X-series Controller

Colorlight X1 Controller| Product Video

Colorlight X1 Controller Description

1. Interfaces

2. Features

·Video input ports including 1×HDMI×1, 2×DVI;

·Supports input resolution up to 1920×1200@60Hz;

·Loading capacity:1.31 million pixels,Maximum Width/Height: 4096 pixels/2560 pixels;

·Supports arbitrary switching of video input, and the image can be zoomed freely;

·Dual USB2.0 for high speed configuration and easy cascading;

·Supports splicing and cascading among several controllers with synchronization strictly;

·Supports brightness and chromaticity adjustment;

·Supports improved gray-scale at low brightness;

·Supports HDCP1.4；

·Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight.

3. Specifications

Input Interface
HDMI	HDMI 1.4 Standard, supports 1920×1200@60Hz, supports HDCP
DVI 1	DVI 1.0 Standard, supports 1920×1200@60Hz, supports HDCP
DVI 2	DVI 1.0 Standard, supports 1920×1200@60Hz, supports HDCP
Output Interface
Port1/2	RJ45, 2 Gigabit Ethernet ports
Controlling Interface
USB_OUT	USB output, cascading with the next controller
USB_IN	USB input, which connects with PC to configure parameters
Specifications
Size	1U standard box
Input voltage	AC 100~240V
Rated Power Consumption	8W
Working Temperature	-20~60℃
Weight	2kg

3. Document Download

Colorlight X1 User Manual

Colorlight X1 Specification

What else we can do for you before you shop with us? Talk to us now !

0 comment

03 / March, 2021

Colorlight X2 Controller | Colorlight X-series Controller

Colorlight X2 Controller| Product Video

Colorlight X2 Controller Description

1. Interfaces

2. Features

·Video input ports including 1×SDI, 1×HDMI, 1×DVI, 1×VGA, 1×CVBS;

·Supports input resolution up to 1920×1200@60Hz;

·Loading capacity:1.3 million pixels,Maximum Width/Height: 4096 pixels/2560 pixels;

·Supports arbitrary switching of video input, and the image can be zoomed freely;

·Dual USB2.0 for high speed configuration and easy cascading;

·Supports splicing and cascading among several controllers with synchronization strictly;

·Supports brightness and chromaticity adjustment;

·Supports improved gray-scale at low brightness;

·Supports HDCP1.4；

·Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight.

3. Specifications

Input Interface
SDI	SDI input
HDMI	HDMI input
DVI	DVI input
VGA	VGA input
CVBS	CVBS input
AUDIO	Audio input, input audio signal and transmit to the multifunction card
Output Interface
Port 1/2/3/4	RJ45, 4 Gigabit Ethernet ports
Controlling Interface
USB_OUT	USB output, cascading with next controller
USB_IN	USB input, which connect with PC to configure parameters
Input Index
Port	Number
SDI	1
HDMI	1
DVI	1
VGA	1
CVBS	1
Specification of complete machine
Size	1U standard box
Input Voltage	AC 100~240V
Rated Power Consumption	20W
Working temperature	-25℃~80℃
Weight	2kg

3. Document Download

Colorlight X2 User Manual

Colorlight X2 Specification

What else we can do for you before you shop with us? Talk to us now !

0 comment

03 / March, 2021

Colorlight X3 Controller | Colorlight X-series Controller

Product Video | Colorlight X3 Controller

Colorlight X3 Controller Description

1. Interfaces

2. Features

·Video input ports including 1× HDMI, 2×DVI;

·Supports input resolution up to 1920×1200@60Hz;

·Loading capacity:2.60 million pixels, Maximum Width/Height: 4096 pixels/2560 pixels;

·Supports arbitrary switching of video input, and the image can be zoomed freely;

·Dual USB2.0 for high-speed configuration and easy cascading;

·Supports splicing and cascading among several controllers with synchronization strictly;

·Supports brightness and chromaticity adjustment;

·Supports improved gray-scale at low brightness;

·Supports HDCP1.4；

·Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight.

3. Specifications

Input Interface
HDMI	HDMI 1.4 Standard, supports 1920×1200@60Hz, supports HDCP
DVI 1	DVI 1.0 Standard, supports 1920×1200@60Hz, supports HDCP
DVI 2	DVI 1.0 Standard, supports 1920×1200@60Hz, supports HDCP
Output Interface
Port1/2/3/4	RJ45, 4 Gigabit Ethernet ports
Controlling Interface
USB_OUT	USB output, cascading with the next controller
USB_IN	USB input, which connects with PC to configure parameters
Specifications
Size	1U standard box
Input voltage	AC 100~240V
Rated Power Consumption	8W
Working Temperature	-40~70℃
Weight	2kg

3. Document Download

Colorlight X3 User Manual

Colorlight X3 Specification

What else we can do for you before you shop with us? Talk to us now !

0 comment

03 / March, 2021

Colorlight X4 Controller | Colorlight X-series Controller

Product Video | Colorlight X4 Controller

Colorlight X4 Controller Description

1. Interfaces

2. Features

·Video input ports including SDI×1, HDMI×1, DVI×1, VGA×1, CVBS×1;

·Supports input resolution up to 1920×1200@60Hz;

·Loading capacity:2.6 million pixels, Maximum Width：4096 pixels, Maximum height: 2560 pixels;

·Supports arbitrary switching of video input, and the image can be zoomed freely;

·Dual USB2.0 for high speed configuration and easy cascading;

·Supports splicing and cascading among several controllers with synchronization strictly;

·Supports brightness and chromaticity adjustment;

·Supports improved gray-scale at low brightness;

·Supports HDCP1.4；

·Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight.

3. Specifications

Input Interface
DVI	2 DVI inputs
	VESA Standard (supports 1920×1200@60H), supports HDCP
HDMI	HDMI input
	EIA/CEA-861 Standard, supports 1920×1200@60Hz
	supports HDCPP
SDI	SDI input,compatible with 3G-SDI, HD-SDI, SD-SDI
AUDIO	Audio input, use with multi-function card (optional)
Output Interface
Port1-8	RJ45, 8 Gigabit Ethernet ports
Controlling Interface
USB_IN	USB input, which connects with PC to configure parameters
USB_OUT	USB output, cascading with the next controller
RS232	RJ11 interface, connected with central control
Specifications
Size	1U standard box (482.6mm×44mm×237.5mm)
Input voltage	AC 100~240V
Rated Power Consumption	20W
Working Temperature	-20~60℃
Weight	2.3kg

3. Document Download

Colorlight X4 User Manual

Colorlight X4 Specification

What else we can do for you before you shop with us? Leave your comment.

0 comment

03 / March, 2021

Colorlight X4e Controller | Colorlight X-series Controller

Product Video | Colorlight X4e Controller

Colorlight X4e Controller Description

1. Interfaces

2. Features

•Supports various digital signal ports, including 2×SDI, 1×DP, 1×HDMI (with loop), 1×DVI (with loop)

•Supports input resolution up to 1920×1200@60Hz

•Loading capacity: 2.6 million pixels, Maximum Width/Height: 4096 pixels

•Supports arbitrary switching and scaling of video source

•Supports three-picture displays, the location and size can be adjusted freely

•Supports HDCP1.4

•Dual USB2.0 for high speed configuration and easy cascading among controllers

•Supports brightness and chromaticity adjustment

•Supports improved gray-scale at low brightness

•Compatible with all receiving cards, multifunction cards, optical fiber converters of Colorlight

3. Specifications

Input Interface
DVI	2 DVI inputs
	VESA Standard (supports 1920×1200@60H), supports HDCP
HDMI	HDMI input
	EIA/CEA-861 Standard, supports 1920×1200@60Hz
	supports HDCPP
SDI	SDI input,compatible with 3G-SDI, HD-SDI, SD-SDI
AUDIO	Audio input, use with multi-function card (optional)
Output Interface
Port1-8	RJ45, 8 Gigabit Ethernet ports
Controlling Interface
USB_IN	USB input, which connects with PC to configure parameters
USB_OUT	USB output, cascading with the next controller
RS232	RJ11 interface, connected with central control
Specifications
Size	1U standard box (482.6mm×44mm×237.5mm)
Input voltage	AC 100~240V
Rated Power Consumption	20W
Working Temperature	-20~60℃
Weight	2.3kg

3. Document Download

Colorlight X4e User Manual

Colorlight X4e Specification

What else we can do for you before you shop with us? Talk to us now !

0 comment

02 / March, 2021

Colorlight X6 Controller | Colorlight X-series Controller

Product Video | Colorlight X6 Controller

Colorlight X6 Controller Description

1. Interfaces

2. Features

•Supports various digital signal ports, including 1×SDI, 1×HDMI, 2×DVI

•Supports input resolution up to 1920×1200@60Hz

•Loading capacity: 3.9 million pixels, Maximum width: 8192 pixels, Maximum height: 4096 pixels

•Supports arbitrary switching of video sources

•Supports three-picture display, the location and size can be adjusted freely

•Supports HDCP1.4

•Dual USB2.0 for high speed configuration and easy cascading among controllers

•Supports adjustment of brightness, chromaticity, contrast ratio, tone, and saturation

•Supports improved gray-scale performance at low brightness

•Compatible with all receiving cards, multifunction cards, and optical fiber converters of Colorlight.

3. Specifications

Input Interface
DVI	2 DVI inputs
	VESA Standard (supports 1920×1200@60H), supports HDCP
HDMI	HDMI input
	EIA/CEA-861 Standard, supports 1920×1200@60Hz
	supports HDCPP
SDI	SDI input,compatible with 3G-SDI, HD-SDI, SD-SDI
AUDIO	Audio input, use with multi-function card (optional)
Output Interface
Port1-8	RJ45, 8 Gigabit Ethernet ports
Controlling Interface
USB_IN	USB input, which connects with PC to configure parameters
USB_OUT	USB output, cascading with the next controller
RS232	RJ11 interface, connected with central control
Specifications
Size	1U standard box (482.6mm×44mm×237.5mm)
Input voltage	AC 100~240V
Rated Power Consumption	20W
Working Temperature	-20~60℃
Weight	2.3kg

3. Document Download

Colorlight X6 User Manual

Colorlight X6 Specification

What else we can do for you before you shop with us? Talk to us now !

0 comment

02 / March, 2021

Colorlight X7 Controller | Colorlight X-series Controller

Product Video | Colorlight X7 Controller

Colorlight X7 Controller Description

1. Interfaces

2. Features

•Supports various digital signal ports, including 1×SDI, 1×HDMI, 2×DVI

•Supports input resolution up to 1920×1200@60Hz

•Loading capacity: 5.2 million pixels, Maximum width: 8192 pixels, Maximum height: 4096 pixels

•Supports arbitrary switching of video sources

•Supports three-picture display, the location and size can be adjusted freely

•Supports 16 kinds of preset modes, the saved preset parameters can be loaded at any time according to needs

•Supports HDCP1.4

•Dual USB2.0 for high speed configuration and easy cascading among controllers

•Supports adjustment of brightness, chromaticity, contrast ratio, tone, and saturation

•Supports improved gray-scale performance at low brightness

•Compatible with all receiving cards, multifunction cards, and optical fiber converters of Colorlight.

3. Specifications

Input Interface
DVI	2 DVI inputs
	VESA Standard (supports 1920×1200@60H), supports HDCP
HDMI	HDMI input
	EIA/CEA-861 Standard, supports 1920×1200@60Hz
	supports HDCPP
SDI	SDI input,compatible with 3G-SDI, HD-SDI, SD-SDI
AUDIO	Audio input, use with multi-function card (optional)
Output Interface
Port1-8	RJ45, 8 Gigabit Ethernet ports
Controlling Interface
USB_IN	USB input, which connects with PC to configure parameters
USB_OUT	USB output, cascading with the next controller
RS232	RJ11 interface, connected with central control
Specifications
Size	1U standard box (482.6mm×44mm×237.5mm)
Input voltage	AC 100~240V
Rated Power Consumption	25W
Working Temperature	-40~70℃
Weight	2.3kg

3. Document Download

Colorlight X7 User Manual

Colorlight X7 Specification

What else we can do for you before you shop with us? Talk to us now!

0 comment

02 / March, 2021

Colorlight X8 Controller | Colorlight X-series Controller

Product Video | Colorlight X8 Controller

Colorlight X8 Controller Description

1. Interfaces

2. Features

•Supports various digital signal ports, including 4×DVI and 2×SDI

•Supports input resolutions up to 1920×1200@60Hz

•Loading capacity: 5 million, maximum width: 8192 pixels, maximum height: 4096 pixels

•Supports arbitrary switching of video sources; the input images can be spliced and scaled according to the screen resolution

•Supports six-layer displays, the location and size can be adjusted freely

•Supports 16 kinds of preset modes, the saved preset parameters can be loaded at any time according to needs

•Dual USB2.0 for high speed configuration and easy cascading among controllers

•Supports brightness and chromaticity adjustment

•Supports improved gray-scale performance at low brightness

•Compatible with all receiving cards, multifunction cards, and optical fiber converters of Colorlight

3. Specifications

Input Interface
DVI	4 DVI inputs, in accordance with HDMI 1.4 standard
	Supports 1920×1200@60Hz, 1920×1080@60Hz, supports HDCP
SDI	2 SDI inputs, in accordance with SDI-3G standard
	Supports 1080p, 1080i
Output Interface
Port1-8	RJ45, 8 Gigabit Ethernet ports
Controlling Interface
LAN	Network control (communication with PC, or access network)
USB_IN	USB input, which connects with PC to configure parameters
USB_OUT	USB output, cascading with the next controller
Genlock	Genlock signal input ensures synchronism of display image
Genlock Loop	Genlock synchronous signal loop output
RS232	RJ11（6P6C）*，used to communicate via 3rd party interfaces
Specifications
Size	2U standard box
Input voltage	AC 100~240V
Rated Power Consumption	75W
Working Temperature	-20~60℃
Weight	6.9kg

language

Currency

Search Results for fiber converter Search

Colorlight 5A-75E Receiving Card Description

Novastar VX1000 All-in-One Controller| Novastar VX600 All-in-One Controller Description

Document Download

Colorlight E80 Receiving Card Description

Colorlight i5+ Receiving Card Description

Colorlight I9+ LED Receiving Card Description

Colorlight I9+ LED Receiving Card Description

Colorlight S6F HD Sender Description

Colorlight X1 Controller| Product Video

Colorlight X1 Controller Description

What else we can do for you before you shop with us? Talk to us now !

Colorlight X2 Controller| Product Video

Colorlight X2 Controller Description

What else we can do for you before you shop with us? Talk to us now !

Product Video | Colorlight X3 Controller

Colorlight X3 Controller Description

What else we can do for you before you shop with us? Talk to us now !

Product Video | Colorlight X4 Controller

Colorlight X4 Controller Description

What else we can do for you before you shop with us? Leave your comment.

Product Video | Colorlight X4e Controller

Colorlight X4e Controller Description

What else we can do for you before you shop with us? Talk to us now !

Product Video | Colorlight X6 Controller

Colorlight X6 Controller Description

What else we can do for you before you shop with us? Talk to us now !

Product Video | Colorlight X7 Controller

Colorlight X7 Controller Description

What else we can do for you before you shop with us? Talk to us now!

Product Video | Colorlight X8 Controller

Colorlight X8 Controller Description

What else we can do for you before you shop with us? Leave your comment.