Linsn MC801 Multi Mode LED Fiber Convertor
With the introduction of a long-distance optical fiber transmission system, fiber optic transmission of this technology, the LED display control signal can be transmitted to longer distances, to ensure the integrity of the signal so that the whole LED display system more stable, reliable, and convenient.
Size: 14.0CM×8.7CM (with fixed bracket: 11.4CM×2.8CM),diameter of positioning hole is 0.35CM
Power Supply: 110V～230V，50Hz/60Hz
Data Interface: RJ45 for network cable; SC mode optical connector
Wave-length: Multimode: 850nm Singlemode: 1310nm
Optical-Power Multimode:about -8db; Singlemode: -6db～－8db
Linsn LED Fiber Converter Features:
1.gigabit transmission is a standard physical layer technology.
2.single-mode fiber transmission distance up to 20KM, multi-mode fiber up to 500M.
3.large load force, master control system for 2048 × 1536, can cascade, cascading multiple screens can be used in the same
format of system support.
4.led sender can support multiple led receivers (that is, any multi-block display, split-screen).
5.Perfect picture, red and green can be independently any correction and brightness adjustment.
6.indoor and outdoor-compatible set of cards can be 1/16, 1/8, 1/4, 1/2, and static scanning.
7.it can remotely switch the big screen, the display brightness can be adjusted automatically.
8.Transmission Card transmission part adopts electromagnetic isolation technology, support hotplug.
9.high-bandwidth transmission bandwidth of up to GB level and above.
10.master card reliability, versatility, excellent on-screen circuits are no special requirements.