Luminance and Color Meter

$8,200.00

  • 1° measurement angle
  • Portable, lightweight, compact and battery powered
  • SLR (Single Lens Reflex), precise targeting ; shows exact area to measure
  • Non-contact measurements
  • Converts the color of the indicated area to numerical values
  • Quick measurements of the viewed object color without the influence of outside areas
  • Easy to-read display
  • Luminance units of cd/m² can be selected
  • Two-way RS-232C communication
  • PC connection to send measurement data and receive control signals
  • Color difference measurement
  • User calibration
  • Support for remote control and data processing
  • Light source measurements
  • Reflective-subject measurements
  • Display measurements
Description

The CS-100A Color and Luminance Meter is a portable tristimulus colorimeter for measuring any illumination source, whether it’s a traffic light or a xenon lamp. The CS-100A luminance and color meter allows luminance and chromacity to be measured remotely with an acceptance angle of 1°. It is the perfect marriage of efficiency and ergonomics with regards to spot measurements of color and luminance in a handheld portable instrument. The ultra-portable Konica Minolta color and luminance meters can also measure the brightness and color of the light.

The CS-100A color and luminance meter can measure nearly any type of light source, indoors or out. The CS-100A is incredibly precise, designed for portability, and minimizes measurement time. It is a tristimulus spot meter used to measure the luminance and color values of colored light sources. It serves the same purpose as the LS-100, but with the added bonus of a color measurement option. The CS-100A luminance and color meter has an optical system that allows precise targeting and ensures that the viewfinder shows the exact area to be measured, even up close. The view finder on the CS-100A shows the measured luminance value measurement field as well as the measurement environment. We have also given special attention to minimize flare.

Model CS-100A Luminance Color Meter
Type SLR spot colorimeter for measuring light-source and surface luminance and chromaticity
Measuring angle
Optical system 85mm f/2.8 lens; SLR viewing system; flare factor less than 1.5%
Angle of view 9° with 1° measurement area indication
Focusing distance 1014mm (40 in.) to infinity
Receptor 3 silicon photocells filtered to detect primary stimulus values for red, green, and blue light
Spectral response Closely matches CIE 1931 Standard Observer curves (xÌ2λ, yÌλ, zÌλ)
Response time Switchable: FAST: Sampling time: 0.1s, Time to display: 0.8 to 1.0s;
SLOW: Sampling time: 0.4s, Time to display: 1.4 to 1.6s
Luminance units cd/m² or FL (switchable)
Measuring range*1 FAST: 0.01 to 299,000cd/m² (0.01 to 87,530fL);
SLOW: 0.01 to 49,900cd/m² (0.01 to 14,500fL)
Accuracy*2 Luminance (Y): -2% of reading -1 digit
Chromaticity (x, y): FAST: 48.1cd/m² or above: -0.004; Below 48.1cd/m²: Below measurement range
SLOW: 12.0cd/m² or above: -0.004; Below 12.0cd/m²: Below measurement range
Repeatability*1 Luminance (Y): -0.2% of reading -1 digit
Chromaticity (x, y): FAST: Y 100cd/m² or above: -0.001; 48.1 to 99.9cd/m²: -0.002; Below 48.1cd/m²: Below measurement range
SLOW: Y 25.0cd/m² or above: -0.001; 12.0 to 24.9cd/m²: -0.002; Below 12.0cd/m²: Below measurement range (Measurement subject: Illuminant A)
Target value 1; set by measurement or numerical input
Measurement modes Absolute color: Yxy; color difference ◺ (Yxy)
Display External: LCD; 3 values (Y, x, and y) of 3 digits each with additional indications
Viewfinder: 3-digit LCD (showing luminance value y ) with LED backlight
Data communication RS-232C; baud rate: 4800bps
External control Measurement process can be started by external device connected to data output terminal
Power source One 9V battery; Power can also be supplied via data output terminal
Operating temperature/humidity range 0 to 40°C, relative humidity 85% or less (at 35°C) with no condensation
Storage temperature/humidity range -20 to 55° C, relative humidity 85% or less (at 35° C) with no condensation
Dimensions (W x H x D) 79 x 208 x 154mm (3-1/8 x 8-3/16 x 6-1/16 in.)
Weight 890g (2 lb.) without battery
Standard accessories Lens cap; Eyepiece cap; Protective filter; ND eyepiece filter; 9V battery; Chromaticity chart; Case
Specifications are subject to change without notice.
*1 Standard Illuminant A
*2 Standard Illuminant A measured at ambient temperature of 20 to 30° C
Get a Bulk Price Quote

    Shipping & Delivery

    ①Shipping Fee
    We offer a fixed shipping fee of $78 per order, regardless of size or weight, making shipping costs predictable and manageable.

    ②Handling Time
    Orders for in-stock items are processed within 24 hours. Some items may require an additional 48-72 hours for processing, and we will notify you if this is the case.

    ③Delivery Time
    Our typical delivery time is 3-7 days, depending on your location. In rare cases of delays due to weather, regulations, or holidays, we appreciate your understanding.

    ④Customs & Duties
    Customs duties, taxes, and other import fees are the responsibility of the recipient. For specific requirements, please inform us before shipping.

    ⑤Tracking Your Order
    You will receive a tracking number once your package is shipped. If you experience any issues, please contact us for assistance.

    For more details, please see our [Complete Shipping Policy].