Novastar MRV366 Receiving Card

Novastar Receiving Card MRV366 Description

Product Description:
The MRV366 is a general receiving card that supports up to 1/64 scan. A single MRV366 loads up to 512×256 pixels (8bit) or 256×256 pixels (10bit/12bit). With various highlights such as 12-bit precision pixel level brightness and
chroma calibration and individual Gamma adjustment for RGB, the MRV366 can greatly improve the display effect and user experience.
The MRV366 uses standard HUB75 connectors for communication, resulting in high stability and reliability. It supports up to 32 sets of parallel RGB data. Thanks to its EMC compliant hardware design, the MRV366 has improved electromagnetic compatibility and is suitable to many applications.

Product Features:
Improvements to Display Effect
● Pixel level brightness and chroma calibration
Working with NovaLCT and NovaCLB, the receiving card supports 12-bit precision brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and
chroma consistency, allowing for better image quality.
● Quick seam correction
Working with NovaLCT, the receiving card supports quick adjustment of bright and dark lines caused by splicing of cabinets and modules.
This function is easy to use and the adjustment takes effect immediately.
● 3D function
When the receiving card works with the independent controller which supports 3D function, users can enable the 3D function in NovaLCT or on operation panel of the controller, and set 3D parameters to allow for 3D display effects.
● Individual Gamma adjustment for RGB
Working with NovaLCT (V5.2.0 or later) and the independent controller which supports this function, the receiving card supports individual adjustment of red Gamma, green Gamma and blue Gamma, which can effectively control image non-uniformity under low grayscale and white balance offset, allowing for a more realistic image.
Improvements to Maintainability
● Mapping function
After the Mapping function is enabled in NovaLCT, each of the target cabinets will display the receiving card number and Ethernet port information, allowing users to easily obtain the location and wiring route of receiving cards.
● Voltage and temperature monitoring
The voltage and temperature of the receiving card can be monitored without using peripherals. The monitoring data can be checked in NovaLCT.
● Cabinet LCD
The receiving card supports the LCD connected to the cabinet. The LCD can display temperature, voltage, single operating time and total operating time of the receiving card.
● Bit error rate monitoring
The receiving card can work with NovaLCT (V5.2.0 or later) to monitor the network communication quality between sending device and receiving card, or between receiving cards, and record the number of erroneous packets to help troubleshoot network communication problems.
● Readback of firmware program
In NovaLCT (V5.2.0 or later), the receiving card firmware program can be read back and saved to local computer.
● Readback of configuration parameters
In NovaLCT, the receiving card configuration parameters can be read back and saved to local computer.
Improvements to Reliability
● Status monitoring of dual power supplies
The receiving card supports dual power supplies and can detect whether their working statuses are normal.
● Loop backup
The receiving card can improve the reliability for cascading of receiving cards through main and backup redundant mechanism. If either main or backup cascading lines fail, the other will begin to work to ensure uninterrupted operation of the display.
● Dual backup of program
Two copies of application programs are saved in the receiving card at the factory to avoid the problem that the receiving card may get stuck due to program update exception.

Novastar MRV366 LED Receiver Card Details

Novastar MRV366 Receiving Card Specification

Download Resource:
Novastar MRV366 Specifications V1.2.0